Skip to content

IoT Security Statistics 2026: Connected Device Attacks, Botnets and Vulnerabilities

IoT security statistics from Cloudflare, Zscaler, Forescout, Nozomi, Unit 42, ENISA, the FCC and DOJ: devices, botnets, DDoS records, medical and OT risk.

Omar KhandakerBy , Senior Security Consultant18 min read

Hardware & IoT Penetration TestingFrom $5,200Fixed scope, free retest, no hourly billing.

Get my fixed price

This page collects current Internet of Things (IoT) security statistics: connected device counts, botnets and record DDoS attacks, the riskiest device types, medical and operational technology (OT) exposure, costs, and the US, EU and UK rules. Every figure links to the organization that produced it, mainly Cloudflare, Zscaler ThreatLabz, Forescout, Nozomi Networks, Palo Alto Networks Unit 42, Claroty, ENISA, the FBI, the Department of Justice and the FCC.

How to cite: link to this page or to the primary source beside each figure. Survey figures carry their sample size.

Key numbers at a glance

1. How many IoT devices are connected

A third of enterprise devices sit outside IT management, so the first step in any IoT program is an inventory. You cannot patch, segment or test a camera, badge reader or infusion pump you have not found.

2. IoT botnets and record DDoS attacks

  • 31.4 Tbps was the peak of the largest DDoS attack Cloudflare has reported; it lasted 35 seconds and came from the Aisuru-Kimwolf botnet (Cloudflare DDoS Threat Report 2025 Q4).
  • 1 to 4 million infected hosts, primarily Android TVs, made up the Aisuru-Kimwolf botnet by Cloudflare’s estimate (Cloudflare DDoS Threat Report 2025 Q4).
  • 47.1 million DDoS attacks were mitigated by Cloudflare in 2025, a 121% increase, with network-layer attacks rising from 11.4 million in 2024 to 34.4 million (Cloudflare DDoS Threat Report 2025 Q4).
  • 935 network-layer attacks above 1 Tbps were mitigated in the first half of 2026, 805 of them in Q2, a 519% quarter-over-quarter increase (Cloudflare DDoS Threat Report H1 2026).
  • 251 attacks above 1 Tbps were recorded in Q3 2026, down nearly 69% from Q2, a drop Cloudflare says coincided with the early 2026 law enforcement action against Aisuru, KimWolf, JackSkid and Mossad (Cloudflare DDoS Threat Report 2026 Q3).
  • 18.2 million network-layer DDoS attacks were mitigated in Q3 2026; 96% ended in under 10 minutes and 98% stayed below 1 Gbps (Cloudflare DDoS Threat Report 2026 Q3).
  • 46.5% of all mitigated network-layer bytes in Q3 2026 were Mirai-classified, peaking at 57.23 PB in August; the longest sustained Mirai attack ran 49.7 hours (Cloudflare DDoS Threat Report 2026 Q3).
  • More than 3 million devices had been hijacked by the Aisuru, KimWolf, JackSkid and Mossad botnets as of March 2026, including hundreds of thousands in the United States, mostly digital video recorders, web cameras and Wi-Fi routers (US Department of Justice, 2026).
  • More than 200,000 DDoS attack commands were issued by Aisuru, more than 90,000 by JackSkid, more than 25,000 by KimWolf and more than 1,000 by Mossad, according to court documents (US Department of Justice, 2026).
  • Millions of TV streaming devices, projectors, vehicle infotainment units and picture frames were infected by BADBOX 2.0, in some cases with malware installed before purchase (FBI IC3 Public Service Announcement I-060525-PSA, 2025).

Terabit-scale attacks fell after the takedowns but overall volume did not, and Cloudflare already names new variants (Dysphoria and Evooo1Bot). For organizations, the practical lesson runs both ways: your own cameras and routers can be conscripted, and your internet-facing services need DDoS capacity sized for terabit attacks.

3. IoT malware families and who they target

See what a real pentest finds. Read our sample report, then get a fixed quote in writing.

4. Most attacked and riskiest device types

Routers, cameras and recorders are where attackers start, so they belong in the scope of every network penetration test. Our list of common network vulnerabilities covers the default services and weak management interfaces these devices tend to expose.

5. Default credentials, unpatched firmware and weak configuration

Almost none of this needs a zero-day: known CVEs, factory passwords, Telnet and flat networks do the work. An IoT penetration test checks firmware, radio interfaces and default accounts on the device itself, and network segmentation testing proves whether a compromised camera can reach anything that matters.

6. Medical device (IoMT) exposure

  • 2.25 million medical (IoMT) devices and more than 647,000 OT devices across 351 healthcare organizations were analyzed in Claroty’s 2025 study (Claroty Team82, State of CPS Security: Healthcare Exposures 2025).
  • 9% of medical devices had confirmed known exploited vulnerabilities, affecting 99% of organizations (Claroty Team82, 2025).
  • 89% of organizations had the riskiest 1% of devices: those with KEVs tied to active ransomware campaigns plus insecure internet connectivity (Claroty Team82, 2025).
  • 8% of imaging systems (X-ray, CT, MRI, ultrasound) had ransomware-linked KEVs and insecure connectivity, affecting 85% of organizations (Claroty Team82, 2025).
  • 20% of hospital information systems had ransomware-linked KEVs and insecure connectivity, affecting 58% of organizations (Claroty Team82, 2025).
  • Medication dispensing systems are the riskiest medical device type of 2026, followed by medical image printers, DICOM gateways, MRI scanners and healthcare workstations (Forescout Vedere Labs, 2026).
  • 35%: the prevalence of legacy Windows operating systems in healthcare, second only to retail at 39% (Forescout, 2026).
  • 75% of more than 200,000 infusion pumps scanned had known security gaps, and 52% were susceptible to two vulnerabilities disclosed in 2019 (Unit 42, Infusion Pump Vulnerabilities, 2022).
  • 83% of medical imaging devices ran unsupported operating systems, and 72% of healthcare VLANs mixed IoT and IT assets, in 2018 to 2019 data (Unit 42 2020 IoT Threat Report).

Medical devices stay in service for years after their operating systems stop receiving patches, so hospitals have to rely on segmentation and monitoring, and manufacturers have to build security in before clearance. Our medical device penetration testing guide covers what the FDA expects in a premarket cybersecurity submission.

7. OT and industrial control system (ICS) exposure

  • 18.2% of threats in ENISA’s threat-category breakdown were operational technology threats, from 4,875 incidents analyzed between July 2024 and June 2025 (ENISA Threat Landscape 2025).
  • 76.7% of incidents in the same ENISA dataset were DDoS attacks, mostly by hacktivists, while vulnerability exploitation accounted for 21.3% of observed entry vectors and botnets for 9.9% (ENISA Threat Landscape 2025).
  • Manufacturing was the most targeted OT/IoT sector from June to August 2026 by average alerts per organization, with energy, utilities and waste in third place (Nozomi Networks Labs, Summer 2026).
  • 58% of 2026 vulnerabilities found in real OT/IoT environments were rated high (50%) or critical (8%) by CVSS score, up from 48% (43% high, 5% critical) for 2025 vulnerabilities (Nozomi Networks Labs, Summer 2026).
  • More than 560 zero-day vulnerabilities had been responsibly disclosed by Nozomi Networks Labs by the end of summer 2026 (Nozomi Networks Labs, Summer 2026).
  • Over one quarter of all OT/IoT alerts in the second half of 2025 were associated with adversary-in-the-middle activity (Nozomi Networks, 2025 2H Review).
  • 35.0% of detected attack techniques in the first half of 2025 were denial-of-service techniques (Nozomi Networks, 2025 1H Review).
  • 46% more ransomware attacks hit industrial operators in Q1 2025 than in Q4 2024, with 2,472 potential attacks documented in the quarter (Honeywell 2025 Cybersecurity Threat Report).
  • Power distribution units are the riskiest OT device type of 2026, followed by physical access control systems, UPS units, I/O modules and BACnet routers (Forescout Vedere Labs, 2026).
  • 45% of 1,100 cyber-physical systems security professionals said at least half of their CPS assets are connected to the internet, and 82% said at least one attack in the past year came through third-party supplier access (Claroty, Global State of CPS Security 2024).

The riskiest OT devices are now building and power systems rather than PLCs alone. OT and ICS penetration testing should cover those systems and the IT-to-OT paths a remote attacker would use, and hardware penetration testing covers the controllers and gateways themselves.

8. What IoT and OT attacks cost

  • $4.99 million is the 2026 global average cost of a data breach, a 12% increase over 2025 and a record high (IBM Cost of a Data Breach Report 2026).
  • 45% of 1,100 CPS security professionals reported a financial impact of $500,000 or more from attacks in the previous 12 months, and 27% reported $1 million or more (Claroty, Global State of CPS Security 2024).
  • 53% of the same respondents paid ransoms of more than $500,000, rising to 78% in healthcare (Claroty, 2024).
  • 49% experienced more than 12 hours of downtime from attacks, and 49% said recovery took a week or more (Claroty, 2024).
  • Tens of thousands of dollars in losses and remediation expenses were reported by some victims of the Aisuru, KimWolf, JackSkid and Mossad DDoS attacks, some of which came with extortion demands (US Department of Justice, 2026).
  • €15 million or 2.5% of worldwide annual turnover, whichever is higher, is the maximum fine for breaching the EU Cyber Resilience Act’s essential requirements or its vulnerability handling and reporting obligations (Regulation (EU) 2024/2847, Article 64).
  • £10 million or 4% of qualifying worldwide revenue, whichever is greater, is the maximum penalty under the UK PSTI Act, plus up to £20,000 per day for a continuing breach (Product Security and Telecommunications Infrastructure Act 2022, sections 36 and 38).

No primary source publishes a reliable average cost for an IoT-specific breach. The figures above are the closest: breach costs overall, cyber-physical incident costs from a large survey, and the regulatory ceilings manufacturers now face. For a sense of what testing these devices costs instead, see our hardware penetration testing pricing.

9. Regulation: US Cyber Trust Mark, EU Cyber Resilience Act, UK PSTI

  • March 14, 2024: the FCC adopted rules for the voluntary U.S. Cyber Trust Mark labeling program for wireless consumer IoT products (FCC, U.S. Cyber Trust Mark), which the FCC described as based on criteria developed by NIST (FCC Fact Sheet, 2024).
  • April 13, 2026: the FCC selected the ioXt Alliance as the new Lead Administrator after the first Lead Administrator withdrew (FCC Public Notice DA 26-1162, 2026).
  • October 27, 2026: the FCC was still seeking comment on the label design, certification renewal and post-market surveillance rules needed to stand up the program (FCC Public Notice DA 26-1162, 2026).
  • January 4, 2027: the deadline set by Executive Order 14306 for federal acquisition rules requiring vendors of consumer IoT products to the government to carry Cyber Trust Mark labeling (The White House, Executive Order 14306, 2025).
  • December 10, 2024: the EU Cyber Resilience Act entered into force; its reporting obligations apply from September 11, 2026 and its main obligations from December 11, 2027 (European Commission, Cyber Resilience Act).
  • 24 hours for an early warning and 72 hours for a fuller notification: the CRA deadlines for manufacturers to report an actively exploited vulnerability, with a final report due within 14 days of a fix being available (Regulation (EU) 2024/2847, Article 14).
  • At least five years is the minimum support period the CRA requires, unless the product is expected to be in use for less time (Regulation (EU) 2024/2847, Article 13).
  • April 29, 2024: the UK PSTI regime took effect, banning universal default and easily guessable passwords and requiring a vulnerability reporting contact and a published minimum security update period (GOV.UK, PSTI guidance).
  • April 20, 2026: NIST published IR 8259 Revision 1, Foundational Cybersecurity Activities for IoT Product Manufacturers, replacing the 2020 version; IR 8259A defines the core baseline of device cybersecurity capabilities (NIST IR 8259 Rev. 1, NIST IR 8259A).

The three regimes all target the same root causes this page documents: default passwords, unreported vulnerabilities and devices abandoned without updates. Manufacturers selling into the EU now have hard reporting clocks, and independent testing evidence is the simplest way to show the essential requirements were checked.

What to expect in 2027

  • More devices: IoT Analytics forecasts growth at a 13.2% compound annual rate toward 39 billion devices by 2030 (IoT Analytics, 2025).
  • Full CRA obligations on December 11, 2027, after a full year of mandatory vulnerability reporting (Regulation (EU) 2024/2847, Article 71).
  • Cyber Trust Mark in federal buying: the executive order targets January 4, 2027 for procurement rules, while the FCC was still finalizing label and surveillance rules in late 2026 (Executive Order 14306; FCC DA 26-1162).
  • Trend drawn from the data, not a forecast: terabit-scale attacks fell nearly 69% in the quarter after the botnet takedowns, but Mirai traffic still made up 46.5% of network-layer bytes and new variants appeared (Cloudflare 2026 Q3). Expect the botnet population to rebuild from the same unpatched routers, cameras and TV boxes.

Part of our cybersecurity statistics hub. See also cloud security statistics and penetration testing statistics.

Sources

Frequently asked questions

How many IoT devices are there in 2026? IoT Analytics counted 18.5 billion connected IoT devices in 2024 and expected 21.1 billion in 2025, growing toward 39 billion by 2030 (IoT Analytics, 2025). The average smart home has 22 connected devices (Bitdefender and NETGEAR, 2025).

What is the largest IoT botnet DDoS attack on record? The largest Cloudflare has reported peaked at 31.4 Tbps and lasted 35 seconds, launched by the Aisuru-Kimwolf botnet, estimated at 1 to 4 million infected hosts, mainly Android TVs (Cloudflare, 2025 Q4). The Justice Department said the four botnets it disrupted in March 2026 had hijacked more than 3 million devices (DOJ, 2026).

Is Mirai still active? Yes. Mirai accounted for roughly 40% of blocked IoT malware transactions in Zscaler’s 2025 data (Zscaler, 2025), and Mirai-classified traffic made up 46.5% of network-layer DDoS bytes Cloudflare mitigated in Q3 2026 (Cloudflare, 2026 Q3).

Which IoT devices are attacked most? Routers: over 75% of observed IoT attack incidents in Zscaler’s data (Zscaler, 2025), and the riskiest IT device type in Forescout’s 2026 ranking (Forescout, 2026). In homes, streaming devices, smart TVs and IP cameras carry over half of detected vulnerabilities (Bitdefender and NETGEAR, 2025).

Are medical devices vulnerable? Claroty found that 89% of 351 healthcare organizations had medical devices with ransomware-linked known exploited vulnerabilities and insecure internet connections (Claroty Team82, 2025), and Unit 42 found known security gaps in 75% of more than 200,000 infusion pumps (Unit 42, 2022).

Do IoT security laws ban default passwords? The UK PSTI regime has banned universal default and easily guessable passwords on consumer connectable products since April 29, 2024, with penalties up to £10 million or 4% of worldwide revenue (GOV.UK; PSTI Act 2022). The EU Cyber Resilience Act applies in full from December 11, 2027, and the US Cyber Trust Mark is voluntary (European Commission; FCC).

Omar Khandaker

Written by

Omar Khandaker, Senior Security Consultant

11+ years in the field. Focus: PCI DSS, ISO 27001, ISO 9001 & CMA. Part of the team that scopes, tests, and reports for our clients. Full profile →

Find out what an attacker sees.

Tell us what to test and see your fixed price.

Prefer the full scoping questionnaire? 
Start the conversation

Get a quick proposal

We are online